GE Multilin C60, Instruction Manual

Page: 374 / 544

8-2 C60 Breaker Protection System GE Multilin
8.1 PASSWORD SECURITY 8 SECURITY
8
A command or setting write operation is required to update the state of all the remote and local security operands
shown above.
8.1.2 PASSWORD SECURITY MENU
PATH: SETTINGS
Ö
PRODUCT SETUP
Ö
SECURITY
8.1.3 LOCAL PASSWORDS
PATH: SETTINGS
Ö
PRODUCT SETUP
Ö
SECURITY
ÖØ
CHANGE LOCAL PASSWORDS
Proper password codes are required to enable each access level. A password consists of 1 to 10 numerical characters.
When a
CHANGE COMMAND PASSWORD
or
CHANGE SETTING PASSWORD
setting is programmed to “Yes” via the front panel
interface, the following message sequence is invoked:
1. ENTER NEW PASSWORD: ____________.
2. VERIFY NEW PASSWORD: ____________.
3. NEW PASSWORD HAS BEEN STORED.
To gain write access to a “Restricted” setting, program the
ACCESS LEVEL
setting in the main security menu to “Setting” and
then change the setting, or attempt to change the setting and follow the prompt to enter the programmed password. If the
password is correctly entered, access will be allowed. Accessibility automatically reverts to the “Restricted” level according
to the access level timeout setting values.
If an entered password is lost (or forgotten), consult the factory with the corresponding
ENCRYPTED PASSWORD
.
If the setting and command passwords are identical, then this one password allows access to both com-
mands and settings.
„
SECURITY
„
ACCESS LEVEL:
Restricted
Range: Restricted, Command, Setting,
Factory Service (for factory use only)
MESSAGE
„
CHANGE LOCAL
„
PASSWORDS
See page 8–2.
MESSAGE
„
ACCESS
„
SUPERVISION
See page 8–3.
MESSAGE
„
DUAL PERMISSION
„
SECURITY ACCESS
See page 8–4.
MESSAGE
PASSWORD ACCESS
EVENTS: Disabled
Range: Disabled, Enabled
„
CHANGE LOCAL
„
PASSWORDS
CHANGE COMMAND
PASSWORD: No
Range: No, Yes
MESSAGE
CHANGE SETTING
PASSWORD: No
Range: No, Yes
MESSAGE
ENCRYPTED COMMAND
PASSWORD: ----------
Range: 0 to 9999999999
Note: ---------- indicates no password
MESSAGE
ENCRYPTED SETTING
PASSWORD: ----------
Range: 0 to 9999999999
Note: ---------- indicates no password
NOTE
NOTE