118
PAC8000 Workbench Getting Started Guide
9. Tags can also be mapped to the Discrete Control Interface and then used in IEC
61131-3 programs, functions, and function blocks. Invoke the
Discrete Control
Data Mapping
form to map the peer to peer tags to the Discrete Control Interface.
(Refer to the
Creating a Discrete Control Strategy
section of this guide for more
information.)
Note
: Because peer to peer is a read-only mechanism, to write data, the
destination controller must read from the source controller. For more information,
please refer to the
Troubleshooting | Tech Notes | Writing Values to E-BIMs
section of the Workbench online Help.
GE Intelligent Platforms, Inc.
September 2010