68
PAC8000 Workbench Getting Started Guide
27. Once the IP addresses are assigned, select
Check Network | Wait 2 Seconds
from the
Tools
menu. This causes the network to be queried for controllers and all
controllers found on the network are presented. In our example, one controller is
found:
Note
:
If controllers do not appear in the list view box, it may be necessary to
select the appropriate Network Interface Card, if there is more than one in your
PC. Select the
Tools | Check Network | Select Network Card
pull down menu
and choose the desired card.
GE Intelligent Platforms, Inc.
September 2010
