14
PAC8000 Workbench Getting Started Guide
8000 IO Configurator
The 8000 IO Configurator is launched to configure the system hardware (controllers and
IO modules) when a controller is added to the project or the
Launch 80000 IO
Configurator
node is double-clicked (for existing controllers). When the controller node
(
) is selected, the network attributes of the controller can be specified and IO modules
can be added or deleted. Once a module is added, the specific attributes for each module
can then be configured. Once the required data for the controller and each IO module is
entered, the configuration data is downloaded to the controller using this utility.
For more information regarding the 8000 IO Configurator, please refer to the
IO
Configurator
Training Guide
located in the documentation directory
(<installation_directory>\Documentation\IO Configurator Training Guide.pdf)
or the
IO Configurator online Help
(<installation_directory>Documentation\IOConfig.chm)
.
GE Intelligent Platforms, Inc.
September 2010
