PAC8000 Workbench Getting Started Guide
71
4. Click
the to the left of the controller name to expand the list and display the
module that was just added.
5. Click on the module and select the
Channel Attributes
tab to configure the
module’s channels. The fields are defined as follows:
•
Active
- If this field is checked, the module scans the channel for an input
value. For our example, leave all channels
active
.
•
Alarm Limits
-These settings correspond to hardware alarms, not operator
interface alarms, as the operator interface alarms are configured as part of
the project tag definition. The hardware alarms are set in terms of percent,
GE Intelligent Platforms, Inc.
September 2010
