PAC8000 Workbench Getting Started Guide
111
4. To change the values of logic elements in a ladder diagram, double-click the
element. A
Spy List
can be used to monitor the value of one or more tags. This
occupies the lower portion of the ladder diagram editor window. To select the
variables to display in this window, double-click on the ellipses (…) in the
Spy List
and select
Resource
; then select the desired variable. If both
In1
and
MotorStarter
were put into the Spy List, the window appears as follows:
5. After debugging the logic, the simulator or debugger must be stopped before logic
changes can be made. Select either
Stop Debug
or
Stop Simulation
from the
Debug
menu to stop the debugging process. For our example, select
Stop
Simulation
.
6. This completes the development of the Discrete Control Strategy.
GE Intelligent Platforms, Inc.
September 2010
