GDS Compuprint 2056, User Manual, Page: 41 / 68

User Manual 2056
MAN10xxx-01 33
3. Make sure the printout stays entirely within the printable area or the print head may be
damaged (See the Appendix for specifications). It’s a good idea to print a test sample
using a normal single sheet of paper before you print on the envelopes.
4. Use envelopes only under normal temperature and humidity conditions.
3.2 Changing the Printer Settings
3.2.1 Setting Printer Parameter Through the Control Panel
1. Press the
ONLINE
key on the control panel while turning on the printer. The print head
returns with the printer beeping once. If the
ONLINE
LED and the
PAPER OUT
LED
blink at the same time, it indicates that there is no paper.
2. Set the paper select lever to the proper position. (If in cut sheet mode, the paper select
lever should be in the cut sheet position, otherwise, it should be in the tractor paper
position.)
3. After loading paper, in cut sheet mode, the printer would print out the Current Setting
Report automatically. In tractor mode, after install the paper to the tractor, press
LOAD/EJECT
key, the printer would load paper to the printing home position and start to
print the Current Setting Report.
Figure 3-12 Loading the envelope