GCC Technologies LaserPro FMC280, User Manual

Page: 96 / 129

232002430G(03)
92
NOTE
The LaserPro FMC280 print driver cannot store more than 16 pen colors or different laser
parameter
Speed (Pen Page)
The speed slider controls the laser’s speed during operation with settings ranging from 0.1 – 100%.Keep in
mind, this is the speed the laser moves at when cutting or engraving straight lines. The machine will
automatically slow down when processing curves.
Power (Pen Page)
The power slider controls the laser’s power during operation (engraving power) with a range setting
from 0 – 100%. The percentage setting represents the power for each laser pulse fired.
Tip
Cutting depth and quality are determined by a combination of power
and speed. Slower speeds at higher power will produce deeper cuts, whereas higher
speeds at lower power will produce more shallow cuts.