Jaguar II User Manual
Installation
2-11
2.5 Blade Installation
Figure 2-12 is the illustrator of the blade holder. Insert a blade into the bottom of the blade
holder and remove the blade by pushing the pin. Make sure that your fingers are away from
the blade tip.
Step 1
Install blade (Figure 2-13).
Step 2
Push the blade to the bottom of the blade holder. (Figure 2-14).
Step 3
Adjust the blade tip to suitable length by screwing
“Blade tip adjustment screw” clockwise or
count-clockwise.
Figure 2-14
Tips:
“The proper length” means the blade’s
length is adjusted 0.1mm more than
film’s thickness and it can completely
cut through the film layer yet avoid
penetrating the backing.
Figure 2-12
Pin
Outward ring
Adjustment depth knob
Figure 2-13
