GCC Technologies Elite XL 20ppm, User Manual

Page: 114 / 216

• 8 - 3
When the Comm LED flashes, one of the Elite XL 20ppm’s interface ports is
receiving or transmitting data.
The Paper LED is solid in one of the following situations:
• The printer is out of paper
• The wrong size paper is loaded in the paper tray
• The printer is waiting for you to insert paper because you specified manual feed
in the paper source section of your application’s Print dialog box.
When the Service LED is flashing, you need to perform some type of simple
service procedure in order to continue printing. If this LED is solid, the printer
needs to be serviced by GCC authorized service personnel.
When a LED indicates that the printer needs attention, you will see a message
explaining the situation in the display.
Control panel function keys
On Line key
You use the On Line key to set the printer either on line or off line. The printer is
normally on line — that is, ready to receive data from computers and print it. If you
need to use the control panel menu system, you must take the printer off line. Press
the On Line key to take the printer off line. After you have finished using the menu
system, press the On Line key again to take the printer back on line.
If you press the On Line key while a document is being printed, the On Line LED
flashes. This indicates that the printer will finish processing this document and any
other waiting documents, and then go off line.
Manual Feed key
You use the Manual Feed key:
• When you select manual feed as the paper source for the document in your
application’s Print dialog box.
• When the control panel requests you to load a paper size that is not loaded in
the printer’s paper trays.
In both cases, you load the MultiPurpose feeder with the correct size paper and press
the Manual Feed key.