S1080 User’s Manual
U/M-2013-1000
Revision B
August 22, 2013
Company Proprietary
Page 65 of 87
16.0
NETWORK AND PORT SETTINGS
At this screen, you enter the various parameters for the networks you use, and enable OnVIF, UPNP,
and multicast, and other functions. Select the
Settings
button and then select
Network and Port
, and
the
Network and Port
screen displays. The fields, drop-down lists, and radio buttons on this screen are
described in the sections below.
Figure 16.1
Network and Port Screen
16.1
K
EEP
N
ETWORK
S
ETTINGS
W
HILE
R
ESET
P
ARAMETERS TO
D
EFAULT
C
HECKBOX
When using the
Maintenance
screen (see Figure 20.1) to RESET all camera settings to the factory
default values, click on the
Keep Network Settings While Reset Parameters to Default
checkbox if you
want to keep the Network and IP address settings.
Figure 16.2
Keep Network Settings while Reset Parameters to Default Checkbox
16.2
N
ETWORK
T
AB
The
Enable UPNP
(User Plug and Play) checkbox is located in this tab. Click on it to enable its
functionality.
The
Network Tab
lists the settings for the network your camera is currently connected to. To
modify/change any of the settings, follow the instructions in the table below.
Summary of Contents for S1080 Series
Page 98: ......
