U/M-2013-1000
Revision B
S1080 User’s Manual
Page 52
Company Proprietary
August 22, 2013
11.1.5
Backlight
Specify the desirable metering modes from the drop-down list:
1.
Min
Whole image average
2.
Mid
Center weighted
3.
Max
Spot mode
11.1.6
Flicker Control
Specify the desired frequency of flicker control from the drop-down list. In PAL countries, use a
multiple of 50; in NTSC countries, use a multiple of 60.
1.
NTSC/60Hz:
This setting compensates for 60Hz flicker and affects the display in NTSC mode.
2.
PAL/50Hz:
This setting compensates for 50Hz flicker and affects the display in PAL mode.
11.1.7
White Balance
Specify one of the following white balance modes from the drop-down list, as described in the table
below. The default value is
Auto Normal
. Refer to
APPENDIX A, Definitions
, for more information on
white balance.
Table 11-1
White Balance Mode Options
White Balance Mode Options
Auto Normal
Sunny
Indoor
FL1
Auto Wide
Shadow
Lamp
FL2
11.1.8
Day/Night
Specify one of the following mode options:
1.
Auto
2.
Day/Color
3.
Night/Mono
11.1.8.1
THRESHOLD
Use the slider to specify the desired threshold level from 1 to 16, or enter a value in the field.
11.1.9
Histogram
Enable/disable histogram on the primary video stream: ON, or OFF.
11.1.10
Video Stabilization
Enable/disable video stabilization: ON, or OFF.
Summary of Contents for S1080 Series
Page 98: ......
