GBO Technology S1080 Series, User Manual

Page: 32 / 103

U/M-2013-1000
Revision B
S1080 User’s Manual
Page 22 Company Proprietary August 22, 2013
5.0 STATIC IP ADDRESS PROVISIONING (PC SIDE)
5.1 M
ANUALLY
C
ONFIGURE
IP A
DDRESS
If DHCP support is not available, the GBOT S1080 IP Network Camera can be manually configured to
use a static IP address.
1. Follow Steps 1-5 described in Section 4.0, IP address Provisioning via DHCP.
2. At the Internet Protocol Version 4 (TCP/IPv4) Propertie s dialog box, de-select the Obtain an IP
address automatically radio button and select Use the following IP address radio button.
Figure 5.1 Internet Protocol Version 4 (TCP/IPv4) Properties Dialog Box (2)
3. Obtain information from your local IT personnel to complete the IP address , Subnet mask , and
Default gateway fields.
4. After entering this information, click on the OK button to save the changes and close the dialog
box.
5.2 V
IEW
IP A
DDRESS
S
ETTING VIA
USB
CONF
U
TILITY
Another way to view the IP address is to use USBconf Utility . To use this utility, connect the GBOT
S1080 IP Network Camera to the PC being used via a USB-to-Mini A cable. Follow the steps below.
1. Using a USB to Mini-A cable, insert the Mini-A end of the cable into the receptacle located on the
back panel of the camera (see Figure 5.3).