22
BE24G
IT
Dichiarazione di conformità UE
Il fabbricante:
GI.BI.DI.
Via Abetone Brennero, 177/B,
46025 Poggio Rusco (MN) ITALY
dichiara che il prodotto:
APPARECCHIATURA ELETTRONICA BE24
sono conformi alle seguenti Direttive:
•
e che sono state applicate le seguenti norme armonizzate:
Data
S.r.l.
Direttiva 2014/35/UE e successive modifiche
;
•
Direttiva 2014/30/UE e successive modifiche
;
Direttiva 2014/53/UE e successive modifiche
;
•
Direttiva 2011/65/UE e successive modifiche
;
•
•
•
•
•
•
•
•
•
•
08/02/2019
EN 301 489-1 V2.2.0;
EN 301 489-3 V2.1.1;
EN 300 220-2 V3.2.1;
EN 62479:2010;
EN 60950-1:2014;
IEC 61000-6-1:2016 RVL
IEC 61000-6-2:2016 RVL
IEC 61000-6-3:2020
IEC 60335-2-103:2015+AMD1:2017+AMD2:2019 CSV
Il Rappresentante Legale
Michele Prandi
23
UK
BE24G
• Red warning LEDs for N.C. contacts and for programming.
• Blue LED for times programming.
• Buttons on the circuit board for programming and learning the radio controls.
• Automatic run time learning with simplified procedure.
• Onboard radio receiver that can store up to 200 radio controls.
• Control of the radio transmitter channels via dip switches.
• Deceleration during opening and closing.
• Deceleration speed adjustable via DIP switch.
• Stop and motion inversion after intervention of the safety devices.
• Anti-crushing function both at normal speed and in deceleration.
• Amperometric reading of motor absorption for the anti-crushing function adjustable via DIP switch.
• Pedestrian operation with motor 1 opening.
• Two N.C. inputs, photocell 1, photocell 2.
• One input (SAFETY) programmable as STOP or EDGE.
• Two possible operating logics: step-by-step with stop or condominium selectable via DIP switch.
• Gate phase shift time adjustable via DIP switch.
• Enabling and differentiate programming of the total and pedestrian automatic reclosure.
• Provision for use with buffer batteries.
• Soft-Start and Soft-Stop to limit mechanical shock.
2 - TECHNICAL SPECIFICATIONS/FUNCTIONS
1 - TECHNICAL SPECIFICATIONS
BE24G / AS06270
230 VAC single-phase 50/60 Hz
1-2
24 Vdc
24 Vdc 10W max
Integrated, 200 trasmitters maximum
-20°C +60°C
ENCODER or TIME
24 Vdc 10W max
Electronic control unit for automation
of a double swing gate with 24VDC motors
Control unit
Power supply
No. of motors
Motor power supply
Flashlight
Radio receiver
Operating temperature
Run time
Accessory power supply
Type
WARNINGS:
This product has been tested by GI.BI.DI. for full compliance with the requirements of the directives in force. GI.BI.DI. S.r.l. reserves
the right to change the technical data without prior notice in relation to product development.
READ CAREFULLY THESE INSTRUCTIONS BEFORE PROCEEDING WITH INSTALLATION.
Thank you for choosing GIBIDI.
DISPOSAL:
GI.BI.DI. advises recycling the plastic components and to dispose of them at special authorised
centres for electronic components thus protecting the environment from polluting substances.
Summary of Contents for BE24G
Page 59: ...59 BE24G NOTES...
