![background image](http://html1.mh-extra.com/html/gbc/falcon-60-c/falcon-60-c_instruction-manual_3944392092.webp)
Page 7 - 4
Troubleshooting
F 60 C Operation and Maintenance Manual
© April 2001 General Binding Corporation
Problem : No illumination to the control panel
Hints : • Ensure an E-STOP has not been pushed
down
• Press RESET.
• Confirm that the MAIN POWER is to the
on position.
• Be sure power is supplied to the laminator
Problem : I can only operate using the footswitch.
Hints : • Ensure the PHOTO-EYE is not blocked.
• Place a service call to calibrate sensors.
Problem : I press ENGAGE, the rollers will not turn.
Hints : • Be sure a speed has been set.
• Make sure a motor direction has been
selected.
• Ensure the PHOTO-EYE is not blocked.
Problem : Jerking, stuttering, or excessive noise from
the laminator.
Hints : • Check for excessive brake tension
• Confirm that the rolls of laminate are on
correctly.
• Check for proper chain tension.
• Place a service call.
7.4 Glossary
The glossary can help you in understanding some
of the terminology used when referring to the laminator,
applications, or troubleshooting aspects of the machine.
Bond strength
Refers to one of three conditions; 1) the anchor
strength of adhesive to laminate substrate, 2) the anchor
strength of the laminating film to the product that has been
laminated, or 3) when two layers of film are laminated
together, the strength of the adhesive to adhesive bond.
Center mount
A mounting technique where an image is mounted
centrally on a substrate to provide a decorative border.
Coiling
A term used to describe an image rolling up on
itself. This is caused by differences in the brake tension
used between the upper and lower laminates during and
application process.
Cold laminate
Film that does not require heat to activate the
adhesive. Please see P.S.A. for more information.
Craft paper
A strong brown paper commonly used for single
sided applications.