![background image](http://html1.mh-extra.com/html/gbc/falcon-60-c/falcon-60-c_instruction-manual_3944392064.webp)
Page 6 - 2
© April 2001 General Binding Corporation
Applications
F 60 C Operation and Maintenance Manual
Pressure
Most lamination is performed at 40 ~ 75% of
pressure on the rollers. Once again, there are variables
that may require some adjustments of the above mentioned
pressures.
Typically the thicker the paper, the more pressure
required and for thinner paper ( tissue paper/ light bond
paper ) you can use less pressure ( as little as 50 % ) on
the roller.
When it comes to mounting, the one general “rule”
is to not crush the substrate. Most substrates only require
about 20-50 % of pressure, but variables can effect how
much pressure is actually needed. ( width, thickness,
density, etc. )
E xcessive pressure w ill cause the
substrate to bow or flatten.
IN F O R M A T IO N
Brake tension
Brake tension should always be minimal. Brake
tension should always be even from the top roll of film
to the lower roll of film. Never use excessive amount of
brake tension.
E xcessive brak e tension m ay cause the
im age to curl. A lw ays use the m in im um
am ou nt of brake for the job.
IN F O R M A T IO N
General
C A U T IO N
E xcess pressure can dam age the lam inating
rollers. A lw ays use the m inim um roll
pressure necessary to com plete th e task.
N ever stop the lam inator w hen an im age is
w ithin the nip of the rollers.
IN F O R M A T IO N
L am inates and papers should alw ays be
stored in a con trolled en virom ent.
IN F O R M A T IO N