Safety
Page 1 - 3
F 60 C Operation and Maintenance Manual
© April 2001 General Binding Corporation
1.3 Safety features
The laminator is equipped with four emergency
stops ( E-STOP ). Two are located at the front of the
cabinets and two are at the rear of the cabinets. Refer to
E -S T O P
E -S T O P
To engage an E-STOP, press down on any of the
four. Any E-STOP, when engaged, removes power to
the laminator.
INFORMATION
The machine will only operate if all four
E-STOPS are in the unlatched position.
To continue operation, all E-STOPs must be in
the unlatched position. To reset, twist the E-STOP 1/4
turn counter clockwise.
1
/4
tu
rn
Press RESET located on the control side cabinet
at the rear of the machine just above the main power on/
off.
POWER
Reset
The nip area is protected by a electric photo-eye
which shoots a beam in front of the nip across the width
of the rollers. When this beam is broken, power to the
drive motor is removed. The object must be removed to
clear the photo-eye. The motor engage switch must be
pressed again to continue motor operation.
PR
O-TEC
H
F-60 C
PHOTO-EYE
