Page 4 - 7
Installation
F 60 C Operation and Maintenance Manual
© April 2001 General Binding Corporation
4.6 Accessory pack
Once the Falcon 60 C Laminator has been
unpacked and moved into final position, open the accessory
pack and verify the contents.
Accessory Pack contents
• One Fuse, 250 V, 20 amp ( 186 - 135 )
• Two Fuses, 2,5 amp ( 186 - 220 )
• One fuse, 0.5 amp ( 186-016 )
• One Operators Manual ( 930 - 064 )
• One Towel ( 475 - 950 )
• One Zippy knife ( 475 - 620 )
• One strain relief for main power ( 175-201 )
• One crank handle ( 629-018 )
• One O-ring ( 480 - 005 )
• Four leveling pads ( 470 - 101 )
• One T-handle, 1/4 in. ( 475 - 210 )
• One roll of masking tape ( 475 - 000 )
• One BHCS ( 3/8 - 16 x 5/8 )
If you are missing any of the items listed above,
contact your local service technician or sales
representative.
Contacts:
GBC Parts ( 800 ) 790 - 7787
GBC Europe parts 33 - 45 - 535 - 7676
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
c) Remove all packing materials to a safe distance
from the laminator and dispose of properly.
d) Use two people to carefully roll the laminator to
the desired location.
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
INFORMATION
