Page 4 - 15
Installation
F 60 C Operation and Maintenance Manual
© April 2001 General Binding Corporation
i) Slide the finger board back away from the rollers
nip. Press the motor engage/ disengage to
ENGAGE.
(disengage)
(engage)
j) If the finger board comes in contact with the
rollers while they are turning, contact your
service representative to adjust the PHOTO-
EYEs.
k) Slide the “finger board” towards the roller nip
about center of the front feed table.
fin g e r b o a rd
l) The rollers should stop just before the finger
board can enter the roller nip.
m) Slide the finger board back away from the rollers
nip. Press the motor engage/ disengage to
ENGAGE.
(disengage)
(engage)
n) If the finger board comes in contact with the
rollers while they are turning, contact your
service representative to adjust the PHOTO-
EYEs.
o) Slide the “finger board” on the front feed table
towards the nip about ten in. ( 25 cm ) from the
control side.
fin g e r b o a rd
p) The rollers should stop just before the finger
board can enter the roller nip.
