Safety
Page 1 - 11
F 60 C Operation and Maintenance Manual
© April 2001 General Binding Corporation
1.8 Maintenance
The following symbols are positioned at various
points in Section 8 Maintenance.
W A R N I N G
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
INFORMATION
Improper maintenance, can
result in poor output quality.
ELECTRICAL
S H O C K
Remove power from the laminator before
servicing. You can be severely shocked,
electrocuted or cause a fire.
CAUTION
Excessive pressure can destroy the silicone
layer by pressing to hard or scrubbing
too long in one spot.
Below is a recommended maintenance
schedule. Before performing any of the steps
listed, read through the procedures first.
Please follow the instructions pertaining to
the step you are performing.
INFORMATION
W A R N IN G
W h en op eratin g th e lam in ator u sin g th e
footsw itch , keep h an d s a nd fin gers
aw ay from th e n ip of th e rollers.
Y ou m ay b e C R U S H E D !
ELECTRICAL
S H O C K
Remove power from the laminator before
cleaning. You can be severely shocked,
electrocuted or cause a fire.
ELECTRICAL
S H O C K
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning unless other wise
specified.