![background image](http://html1.mh-extra.com/html/gbc/2064-wf/2064-wf_instruction-manual_3850008009.webp)
GBC 2064
Operation Manual
© 2006 General Binding Corporation
Page 8
LCD READ OUT
Figure 2.
A. Top Set Temp:
•
This will display the “Set Temp.” of the Top Main
Roller.
B. Bottom Set Temp:
•
This will display the “Set Temp.” of the Bottom Main
Roller.
C. Mode:
•
This will display either FWRD or REAR depending
on what direction the operator selects.
D. Speed:
•
This will display the “Set Speed.” of the Laminator.
E. Top Current Temp:
•
This will display the “Actual Temp.” of the Top Main
Roller.
F. Bottom Current Temp:
•
This will display the “Actual Temp.” of the Bottom
Main Roller.
G. GAP:
•
This will display the “Gap.” in a percentage. The gap
range is 0%-100%. When pressure is applied to the
Main Rollers, the Gap should read “000%” As the rollers are opened, the gap percentage will increase.
H. PRS:
•
This will display the downward “Pressure.” of the Main Rollers in a percentage. The more you increase downward
pressure of the Main Rollers, the percentage will go up. The range is 000%-100%.
REAR CONTROL
Figure
3.
A. Stop Button:
•
While running the machine from the Rear, by
pressing the “STOP” button, the rollers will stop.
B. Rear Button:
•
By pressing the “Rear” button, the machine will
work going to the rear of the machine.
C. Forward Button:
•
By pressing the “Forward” button, the machine will
work going to the front of the machine.
Figure 3
Figure 2