![background image](http://html1.mh-extra.com/html/gaui/x7-flybarless/x7-flybarless_instruction-manual_3804311009.webp)
7
GAUI
GAUI
TAI SHIH HOBBY CORPORATION
TAI SHIH HOBBY CORPORATION
M3x5
M3x5
M3x4
M3x4
M3x12
M3x4
M3x20
M3x20
M3x20
M3x20
M3x5
M3x5
Frame post(26.4mm)
Front bevel gear mounting block
Tail boom mount
Divider frame
Main Frame Assembly (Left)-2
Main Frame Assembly (Left)-3
螺絲均需上止滑劑
含上M3x20x螺絲,待P.21組裝完成後
在鎖緊螺絲。
組裝(艙罩支柱B型)時先將M3x12螺絲鎖入
支柱內,在使用直徑2以下的圓棒插入
孔內並旋緊艙罩支柱。
All Screws on side plates should
be applied with thread lock.
Fix the M3x20 screw (don't tighten the
screw yet), wait until the tail set is
assembled (P.21),then tighten the screw.
機體側板組裝(左)-2
隔板
機體側板組裝(左)-3
圓鋁柱(26.4mm)
B4x9x4
前尾管夾座
M3x6
螺絲均需上止滑劑
All Screws on side plates should
be applied with thread lock.
M3x4___________
2
M3x6___________
2
Bearing_
4x9x4____
1
前傘齒輪固定座
M3x6___________
3
M3x4___________
1
M3x5___________
2
M3x20__________
4
M3x12__________
1
組裝尾管夾座時,請將貫穿孔處朝同方向組裝。
When assembling the tail boom clamp, the
holes should be facing the same direction.
When assembling the canopy posts, fix
the M3x12 screw inside the post, use a
stick as tool to tighten the canopy posts.