17
GAUI
GAUI
TAI SHIH HOBBY CORPORATION
TAI SHIH HOBBY CORPORATION
M2x5___________
2
M2x4.8x6.5______
1
Bearing_
8x12x3.5_
2
M3x3___________
2
P2x12__________
2
M2x5
M2x4.8x6.5
M3x3
P2x12
B8x12x3.5
一般潤滑油
置入雙推螃蟹夾座後如作動不順暢,
請重新調整P.16雙推尾舵的M3x5螺絲。
N3x5.5L_________
2
Bearing_
5x10x4___
4
W5.1x7x0.7______
2
T_5x10x4_______
2
M2x10__________
2
P2x2.95x4.3_____
2
M4x4___________
1
N3x5.5L
B5x10x4
B5x10x4
W5.1x7x0.7
T5x10x4
M4x4
M2x10
P2x2.95x4.3
鎖緊N3x5.5L螺母時勿過分鎖緊需
保持機構順暢。
鎖緊M2x10螺絲時不可過份鎖緊。
內徑較小
內徑較大
(S)
(L)
Smaller inner race
Bigger inner race
Apply thrust bearing grease
止推軸承專用油
螃蟹夾座組裝
尾旋翼夾頭組裝
雙推螃蟹夾座
舵柄
螺絲均需上止滑劑
All Screws should
be applied with thread lock.
螺絲均需上止滑劑
All Screws should
be applied with thread lock.
尾旋翼夾頭
Tail Pitch Slider Assembly
Tail Rotor Head Assembly
If the tail pitch slider can not move smoothly,
adjust the M3x5 screw on tail control arm
mount.
Do not over tighten the N3x5.5L screw,
make sure the tail rotor head work
smoothly.
Do not over tighten the M2x10 screw.
Tail pitch slider
Apply grease
Tail rotor control
arm mount
Tail blade grip