27
GAUI
GAUI
TAI SHIH HOBBY CORPORATION
TAI SHIH HOBBY CORPORATION
可使用直徑小於2mm的圓棒插入拉桿調整孔
並調整主旋翼拉桿長度。
主旋翼拉桿(3號)
主旋翼拉桿組裝
伺服器組裝注意事項
不鏽鋼主旋翼拉桿(52mm)
伺服機固定片
伺服機固定片
4.8mm球頭
P2x3.5x1.5
P2x3.5x2.5
P2x3.5x3.5
31mm
21.7mm
50.2mm
1.使用2號CCPM拉桿頭製作3支拉桿並在後續組裝時扣上伺服機
，確認拉桿是否為垂直(1-1)。
2.如有偏移情況請適當增加球頭延伸長度或調整P.6 P.9伺服機座
位置使拉桿為垂直。
1.可增加伺服機固定片調整伺服機拉桿為垂直。
2.調整球頭延伸長度使伺服機拉桿為垂直。
使用2號伺服機拉桿頭。
各廠牌伺服機不同請依需求配置。
1-1
17.4mm
M2x14__________
2
N2x4___________
2
M2x14
N2x4
Ball with Stand(4.8mm)
Main Blade Push Rod Assembly
Servo Setting and Adjustment
Use a stick (<2mm) as tool, insert it
into the adjusting hole for adjusting the
length of the main blade push rod.
1. Add mounting plates for adjusting the
push rod to be perpendicular if needed.
2. Adjust the linkage ball with aluminum
sheath as illustrated.
1. After assembling 3 sets of servo push rod with No.2 ball links,
confirm if the push rods are perpendicular as illustrated.
2. If not, you need to adjust it with aluminum sheaths or adjust the
servo mount as illustrated in P.6 and P.9.
Use No.2 ball link. Adjust the push rod
length according to the servos you use.
Ball link (No.3)
Stainless main blade push rod
(52mm).
Servo mounting plate
Adjusting aluminum sheath.
Servo mounting plate
調整用鋁套:
