16
GAUI
TAI SHIH HOBBY CORPORATION
GAUI
TAI SHIH HOBBY CORPORATION
將P2x10置入尾軸傘齒輪並以M3x3止付螺絲
固定。
將尾傳動傘齒輪置入尾殼總成內並組裝
尾軸。
將M3x6螺絲鎖入尾殼時請確認尾管定位孔
鎖附位置相同。
M3x3___________
1
M3x6___________
4
P2x10__________
1
Bearing_
6x13x5___
2
Bearing_
12x21x5__
2
M3x3
M3x6
M3x6
M3x6
M3x6
定位孔
B6x13x5
B6x13x5
P2x12
B12x21x5
B12x21x5
M3x6
M3x5
B3x7x2
P2.5x5.8
M2x2
W3.1x4.6x1
組裝雙推尾舵M3x5螺絲時請配合P.17組裝。
尾殼組裝
雙推尾舵組裝
螺絲均需上止滑劑
All Screws should
be applied with thread lock.
雙推尾舵
尾舵柄座
W3.1x4.6x1______
2
Bearing_
3x7x2____
2
M3x5___________
1
P2.5x5.8________
2
M2x2___________
2
螺絲均需上止滑劑
All Screws should
be applied with thread lock.
一體式尾殼
20T尾傘齒輪
20T尾傳動傘齒輪
M3x6___________
2
請注意:鎖附尾舵柄座時需使用M3x5螺絲。
Tail Gear Case Assembly
Tail Rotor Control Arm Assembly
Install the tail bevel gear into the tail gear
case, and assemble the tail output shaft.
Insert the P2x10 pin into tail driven bevel
gear, fix it with M3x3 socket set screw.
Confirm the tail gear case is fixed by fixing
the M3x6 screw into the aligning hole.
Notice: Fix the tail rotor control arm with
M3x5 screw.
When assembling tail rotor control arm, please
assemble together with tail pitch slider (P.17).
One-piece design tail gear case.
Aligning hole
Tail rotor control arm mount
Tail rotor control arm
20T tail bevel gear
20T tail driven bevel gear
