GA-600S 3D Wheel Aligner User Manual
ii
Copyright Information
Copyright ©2009~2013. All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior
written permission of our company. The information contained herein is designed
only for the use of this unit. We are not responsible for any use of this information as
applied to other units.
Neither we nor our affiliates shall be liable to the purchaser of this unit or third parties
for damages, losses, costs, or expenses incurred by purchaser or third parties as a
result of: accident, misuse, or abuse of this unit, or unauthorized modifications,
repairs, or alterations to this unit, or failure to strictly comply with our operating and
maintenance instructions.
We shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as our Original
Products.
1 Precautions
Please read the User’s Manual and the Installation and Parts Manual carefully
before operating our 3D Series Wheel Aligner.
Only the qualified technician can operate the Wheel Aligner.
The operator must have knowledge of computer application and basic theory of
wheel alignment.
The power voltage of 3D series wheel aligner is AC110~240V±10% 50±1Hz /
60±1Hz.
The power outlet must be a Three PIN socket and its earth pin
must be well grounded.
If the power voltage is not stable, please purchase and
use AC voltage stabilizer.
3D series wheel aligner is operated with image sensing; by analyze target images
recorded by high-resolution video camera. Avoid reflect Infrared light or direct
sun light to the targets.
3D series wheel aligner is high precision equipment; special care should be taken
during installation and operation to prevent the casing from being distorted and
the internal parts from being damaged.
Install the lift according to the lift specifications before installing 3D series wheel
aligner. Check the lift regularly for fixedness and levelness to ensure personal
safety and correct measurement. Remove the obstacles around the lift for
convenient operation.
Don’t place 3D series wheel aligner on a vibrated object or an oblique surface.
Avoid direct sunlight and moisture.
Avoid splashing water on the surface of 3D series wheel aligner, for it may cause
permanent damage to the system.
