GA-600S
3D Wheel Aligner User Manual
4-3
[Help Information]
Help system and tips for the current page.
[Target Monitor]
Can find out the reason in target monitor screen when system prompt target blocked.
Also can adjust the lateral beam height manually in this screen.
[Quick Measurement]
If exit program accidently after rolling compensation, can access quick measurement,
but the result might be a bit inaccurate.
[Next]
To make the measurement follow the default sequence (select vehicle->rolling
compensation->Caster swing->report print).
4.2.1.2 Push Compensation
Push Compensation is to eliminate the error caused by the physical defect of rim and
tire as well as the installation of clamps. Accuracy level could be higher after eliminate
these error. As show in the follow graph:
Figure 4. 3
Operation instruction:
1
．
Mount the clamps and targets.
2
．
Place the passing bridge.
3
．
Center steering wheel, lock the steering wheel, and remove brake pedal depressor.
