GA-600S 3D Wheel Aligner User Manual
Chapter 5
Frequent asked question
5. 1 Computer Operation
5. 1. 1 Computer can not boot
Check the power supply of computer.
Check if the power button is clicked on both the computer host and monitor,
whether the indication LED is flashing.
Check the brightness and contract of the monitor.
5. 1. 2 Can not enter WINDOWS 7 desktop
Computer boot file missing.
BIOS error.
Hardware failure.
5. 1. 3 Mouse/keyboard not functional
Mouse/keyboard connection to the computer host is faulty.
Mouse/Keyboard not compatible with computer host
Mouse/Keyboard faulty.
5. 1. 4 Printer not functional
Check power supply of print, signal cable connection to computer host, and if
the print is on linked mode.
Check installation and setting of Driver for printer.
Check if the computer is virus affected.
5. 1. 5 Can not run wheel aligner software
Software core file missing.
Registry error.
5. 2 Standard measurement
5.2.1. When turn steering wheel, there’s no
camera/target block prompt when block rear
targets.
This is normal. Won’t affect the measurement result.
