GA-600S 3D Wheel Aligner User Manual
2-2
3D Series Wheel Aligner
2. 2 Target and Clamps
3D series wheel aligner has 4 targets (come together with 4 clamps), is a key
component for acquire raw data of wheel alignment (Figure 2. 2), Cameras will capture
target image for data processing. On the back of the target, there’s identification label
for target position.
Figure 2. 2
2. 3
Communication Cable
3D series wheel aligner has two cables between computer and lateral beam, one is USB
data cable, another one is power supply cable, shall keep them in good condition to
avoid damage to the entire alignment system.
2. 4
Turntable and passing bridge
3D series wheel aligner comes with 2 mechanical turntables, as show in figure2. 2.
Turntable shall be placed on the front wheel position on the lift, each turntable has a
passing bridge, to ensure vehicle move smooth when do rolling compensation.
