GA-600S
3D Wheel Aligner User Manual
1-6
1. 3. 11 delay (angle)
The same axle’s relative offset in longitudinal direction of the vehicle is called the delay.
When the right wheel is behind of the left wheel on the same axle, the delay is positive,
otherwise, it’s negative. The angle between the wheel center line and the vehicle
longitudinal geometric center line vertical is called the delay angle.
1. 3. 12 Included angle
The sum of Kingpin inclination angle and camber angle is called the included angle.
1. 4 Function and feature
All new three dimension computer visual measurement: adopted high performance
camera to automatically detect the alignment parameter. The equipment was
calibrated at production, does not need on-site calibration at installation.
Electric component free target: no electric component or wiring on the target,
which ensure the equipment to be more convenient and durable.
3D (Fixed Height) wheel aligner can be installed at any height according to user’s
interest.
3D (Auto Focus) wheel aligner can detect the lift position and follow the lift up and
down, to ensure the equipment always in best working height.
Extremely simplified test procedure.
Complete parameter measurement: Capable of test of front/rear toe-in, front/rear
camber, thrust angle, caster, SAI/Kingpin, wheelbase, track (thread) etc.
Large database: More than 20000 records of vehicle all over the world, and user
can add data at will.
Historical data storage for client management.
Real-time help system.
