GA-600S 3D Wheel Aligner User Manual
iii
The targets are major components for wheel alignment, be careful in storage or
operation. Clean the dirt with neutral detergent or ethanol.
Accurate calibration is made during manufacturing, and the design doesn't require
calibration work for a few years, install 3D series wheel aligner according to the
user/installation manual. Do
NOT
move the column, open or adjust cameras, or
else the warranty is expired automatically, and end user will bear the cost of
damage.
Video cameras are high precision parts; the filters shall be kept clean.
Turn off the power after operation. Check all bolts and parts after maintenance,
and tighten the slackened bolts and parts in turn for safety.
Check the packing list before installing. Do not hesitate to contact us or our
distributors for any questions.
2 General Safety Instructions
The chassis measurement system may only be used to measure vehicle axles
according to specifications.
Only trained professional may operate the system.
Safety equipment may not be removed and/or disabled.
Repairs may only be performed by trained customer service personnel.
Arbitrary modifications of the system exclude any liability by our company for
any resulting damages.
Any work on the electrical installation may only be performed by electricians.
The wheel aligner system may not be operated in explosion- prone
surroundings.
The operator must provide appropriate fire protection measures at the
measuring platform. In particular, any flammable or self- combusting items
(such as cloths soaked in solvents or oil) and fluids, or foreign items and other ignition
sources, should not be stored in the tool trolley.
