43
Replacing the input board
www.gateway.com
3
Press the power button to drain any residual power from your Family Media
Center.
4
Remove the case cover by following the instructions in “Opening the
Family Media Center case” on page 5.
5
Remove the front bezel by following the instructions in “Replacing the
front bezel” on page 8.
6
Disconnect the two cables connected to the input board.
7
Remove the five screws that secure the input board to the case.
Screw
Screw
Screw
Screw
Screw
8509776.book Page 43 Monday, January 5, 2004 2:54 PM
