10
Replacing Gateway Family Media Center Components
www.gateway.com
8
Align the five latches with the latch slots on the inside front of the case,
then press in on the front bezel to snap the latches into place.
9
Reinstall the case cover by following the instructions in “Closing the
Family Media Center case” on page 7.
10
Reconnect the power cord and modem, network, and all peripheral device
cables.
Replacing the DVD drive
To replace the DVD drive:
1
Follow the instructions in “Preventing static electricity discharge” on
page 3.
2
Shut down your Family Media Center, then disconnect the power cord and
modem, network, and all peripheral device cables.
3
Press the power button to drain any residual power from your Family Media
Center.
4
Remove the case cover by following the instructions in “Opening the
Family Media Center case” on page 5.
5
Remove the front bezel by following the instructions in “Replacing the
front bezel” on page 8.
8509776.book Page 10 Monday, January 5, 2004 2:54 PM
