14
Replacing Gateway Family Media Center Components
www.gateway.com
Replacing the DVD drive bezel
To replace the DVD drive bezel:
1
Follow the instructions in “Preventing static electricity discharge” on
page 3.
2
Shut down your Family Media Center, then disconnect the power cord and
modem, network, and all peripheral device cables.
3
Press the power button to drain any residual power from your Family Media
Center.
4
Remove the case cover by following the instructions in “Opening the
Family Media Center case” on page 5.
5
Remove the front bezel by following the instructions in “Replacing the
front bezel” on page 8.
6
Remove the DVD drive by following the instructions in “Replacing the
DVD drive” on page 10.
7
Insert a straightened paper clip into the DVD manual eject hole to release
the DVD drive.
Manual eject hole
8509776.book Page 14 Monday, January 5, 2004 2:54 PM
