23
Replacing the power supply
www.gateway.com
Replacing the power supply
To replace the power supply:
1
Follow the instructions in “Preventing static electricity discharge” on
page 3.
2
Shut down your Family Media Center, then disconnect the power cord and
modem, network, and all peripheral device cables.
3
Press the power button to drain any residual power from your Family Media
Center.
4
Remove the case cover by following the instructions in “Opening the
Family Media Center case” on page 5.
5
Remove the front bezel by following the instructions in “Replacing the
front bezel” on page 8.
6
Disconnect the power cable connected to the DVD drive by following the
instructions in “Replacing the DVD drive” on page 10.
7
Remove the hard drive duct by following the instructions in “Replacing
the hard drive duct” on page 17.
8
Disconnect the power cable connected to the hard drive by following the
instructions in “Removing the hard drive module” on page 18.
8509776.book Page 23 Monday, January 5, 2004 2:54 PM
