44
Replacing Gateway Family Media Center Components
www.gateway.com
8
Remove the input board.
9
Install the replacement input board on the case and align the screw holes
with the input board standoffs.
10
Secure the input board with the five screws you removed in Step 7.
11
Connect the cables you disconnected from the input board in Step 6.
12
Reinstall the front bezel by following the instructions in “Replacing the
front bezel” on page 8.
13
Reinstall the case cover by following the instructions in “Closing the
Family Media Center case” on page 7.
14
Reconnect the power cord and modem, network, and all peripheral device
cables.
Replacing the battery
If the Family Media Center clock does not keep time, replace the system battery.
Use a battery of the same size and voltage as the original battery that was in
your Family Media Center.
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries following the manufacturer
’
s instructions.
8509776.book Page 44 Monday, January 5, 2004 2:54 PM
