Gatekeeper Systems Digital Smart Recorder NiTRO 900, Manual

Page: 24 / 62

-24-
Use the menu control buttons to navigate to ADVANCED and press GO.
Advanced Configuration
Advanced Configuration Advanced Configuration
Advanced Configuration....
There are sixteen menus under the ADVANCED sub menu. The menus are defined below. Refer to the following pages for
a detailed description of how to use each menu.
The Startup Mode allows the user to configure the system to startup in either Record mode,
Playback mode or Standby mode.
There are two options for the speed units to be used. The two choices are US (mph)
US (mph) US (mph)
US (mph) or Metric (kph)
Metric (kph) Metric (kph)
Metric (kph).
If the recorder is wired to monitor the speed of the vehicle, the pulses per unit need to be calibrated
to the speedometer. When the units are calibrated, the speedometer reading will appear on the
LCD screen and in the subtitles.
The Set Pulses menu is used to manually input how many pulses are in one distance unit. This is
used if the configuration was reset. As long as the value of pulses is known, the recorder can be re-
calibrated without having to redo the entire calibration test. This setting does not apply to GPS
Speed.
Stereo Audio can be recorded or ignored.
This setting determines the microphone audio level input.
This setting determines the audio level output.
The Subtitle Position allows you to position the subtitle text on the top or bottom of the video.
Camera Type allows for more record time if all the cameras used are black & white cameras.
If multiple cameras are connected to the system, the system must be configured for the correct
amount of active cameras: 1, 2, 3
1, 2, 3 1, 2, 3
1, 2, 3 or 4
4 4
4.
Video Standard select the appropriate video signal standard to match with the camera signal type,
NTSC or PAL
Camera Dwell is used to set the system up to automatically switch cameras when there is more than
one connected to the system.
The Record Quality allows you to record in Standard or High Resolution.
Frames per second relates to the video standard used:
In NTSC mode, the FPS is listed as 1, 5, 10, 15, 20, 25, 30
In PAL mode, the FPS is listed as 1, 5, 10, 15, 20, 25
The Sensor Setup menu allows you to configure each sensor name up to 5 characters and select
which camera is associated with each sensor
The Sensor readings menu displays and chooses all sensors that can be displayed in the subtitles.
STARTUP MODE
SET UNITS
CALIBRATE TEST
SET PULSES
AUDIO
SUBTITLE POSITION
CAMERA TYPE
CAMERAS
VIDEO STANDARD
CAMERA DWELL
RECORD QUALITY
RECORD FPS
SENSOR SETUP
SENSOR READINGS
VOLUME IN
VOLUME OUT