Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual Download Page 13

Page: 13 / 62

-13-

Inside Glove Box or
Under Dash Board

Behind Modesty Panel

Behind Driver’s Seat

Driver’s Console

Inside or on
Bulkhead

Ensure the NiTRO™ system is off while inserting the comrad™

Installation

Installation....

Always refer to your applicable Vehicle Safety Regulations before mounting any
hardware.

Ten Steps

Ten Steps for Installers

for Installers

for Installers....

Locate a site for the NiTRO™ System

Locate a site for the camera(s)

Locate a site for the GPS Antenna (optional)

Locate a site for the IR Illuminator (optional)

Locate site for all other accessories, ie. Alarm Button, Record LED (optional)

Mount the Isolation Suspension System plate

Run Power harness through enclosure to destination

Connect the constant power on the power harness to the Bus battery

Run the camera harness(es) to the camera destination(s)

Run the Sensor harness to the destination

Installers should refer to the individual product installation sheets that are included
for each part listed below:

Camera(s)

Power Harness

GPS

Camera Harness(es)

All Accessories

Recommended

Recommended System Locations

System Locations

System Locations....

Figure

Figure 7

7: Recommended System

: Recommended System

: Recommended System L

Locations

ocations

ocations....

Summary of Contents for Digital Smart Recorder NiTRO 900































































Search results

Summary of Contents for Digital Smart Recorder NiTRO 900

Reviews:

Related manuals for Digital Smart Recorder NiTRO 900

Brands by name

Popular brands

Gatekeeper Systems Digital Smart Recorder NiTRO 900, Manual

Search results

Summary of Contents for Digital Smart Recorder NiTRO 900

Reviews:

Related manuals for Digital Smart Recorder NiTRO 900

Brands by name

Popular brands