Gatekeeper Systems Digital Smart Recorder NiTRO 900, Manual

Page: 25 / 62

-25-
PURPOSE: PURPOSE: PURPOSE: PURPOSE: The startup mode defines the state the recorder will be in when it has been turned on.
ENTRY
ENTRY ENTRY ENTRY: Use the plus and minus signs to scroll
through the three options.
EXIT EXIT EXIT EXIT: Use the right arrow to advance to the next menu or left arrow to
advance to the previous menu. Press the blue menu button to exit and
return to the Advanced sub menu.
OTHER
OTHER OTHER OTHER:
Record:
the recorder will automatically
start recording – if record delay is set
to a value other than no delay then it
will wait the delay time before starting
to record.
Playback:
the recorder will
automatically display the playback
menu and a video playback window on
the video monitor.
Standby: the recorder will stay on the
configuration screen, awaiting some
type of action upon startup.
DEFAULT CONDITION
DEFAULT CONDITION DEFAULT CONDITION
DEFAULT CONDITION: Record
PURPOSE
PURPOSE PURPOSE
PURPOSE: The set units menu relates to units of measured speed. There are two options for the units to be used. The two
choices are US
US US US or Metric Metric Metric Metric. If US units are chosen, the mph (miles per hour) will be displayed for the measurement of speed.
If metric is chosen, then the units are kph (kilometers per hour).
ENTRY
ENTRY ENTRY ENTRY: Use the plus and minus signs to toggle
between the two options.
EXIT
EXIT EXIT EXIT: Use the right arrow to advance to the next menu or left arrow to
advance to the previous menu. Press the blue menu button to exit and
return to the Advanced sub menu.
DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION: US
PURPOSE
PURPOSE PURPOSE
PURPOSE: If the recorder is wired to monitor the speed of the vehicle, the units need to be calibrated to the speedometer.
When the units are calibrated, the speedometer reading will appear on the LCD screen and in the subtitles. If no
. If no . If no
. If no
speedometer is hooked up, then speed will not be displayed on the screen. speedometer is hooked up, then speed will not be displayed on the screen. speedometer is hooked up, then speed will not be displayed on the screen. speedometer is hooked up, then speed will not be displayed on the screen. Calibration does not need to be done if you are
using GPS for speed readings.
ENTRY
ENTRY ENTRY ENTRY: Press ‘Go’ to enter the calibrate menu.
Press start to begin calibration and
start driving one measured mile or km.
Press Done after traversing one mile
(or km) or Cancel to stop in the middle
of calibration and return to the
Calibrate menu.
Calibration is complete when Done is
pressed; the pulses per unit are shown.
EXIT EXIT EXIT EXIT: Press the blue menu button to exit and return to the Calibrate
Test menu.
OTHER
OTHER OTHER
OTHER: Whatever units were chosen in the Set
Units menu will be displayed under the
calibration. After calibration is complete, the
number of pulses is automatically displayed in
the Set Pulses menu.
Example: To calibrate the
recorder for a vehicle traveling in miles per
hour:Press “Start” in the Calibrate Test menu on
DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION: N/A
STARTUP MODE
CALIBRATE TEST
SET UNITS