Gatekeeper Systems Digital Smart Recorder NiTRO 900, Manual

Page: 37 / 62

-37-
Connecting the Recorder to a Computer
Connecting the Recorder to a Computer Connecting the Recorder to a Computer
Connecting the Recorder to a Computer....
You will need:
You will need: You will need:
You will need:
NiTRO™ 900 Recorder
USB–Ethernet Adaptor
Crossover Cable
PC with Ethernet port
The NiTRO™ unit acts as a DHCP Server through the USB Ethernet. A DHCP Client on the Laptop/PC is required
for the Laptop/PC to obtain an IP automatically.
Recorder to Local Area Network (LAN)
Recorder to Local Area Network (LAN) Recorder to Local Area Network (LAN)
Recorder to Local Area Network (LAN)
.
You will need: You will need: You will need: You will need:
NiTRO™ 900 Recorder
Ethernet Cable
LAN connection port
A DHCP Server is required on the Local Area Network for the NiTRO™ unit to obtain an IP automatically through
the rear Ethernet port.
comrad comrad comrad comrad™ Only to Computer ™ Only to Computer ™ Only to Computer ™ Only to Computer....
Power down the recorder and remove the comrad™ unit by pulling
firmly on the front.
Figure Figure Figure Figure 22 22 22 22: : : : comrad comrad comrad comrad™ ™ ™ ™ Removal Removal Removal Removal....
Insert both heads of the Dual Head USB Cable into the USB ports on
your computer. Connect the mini end of the USB cable into the USB
port on the back of the comrad™.
Figure
Figure Figure
Figure 23
23 23
23:
: :
: comrad
comrad comrad
comrad™ to PC via USB
™ to PC via USB ™ to PC via USB
™ to PC via USB....
If the Dual Head USB Cable does not provide enough power for the comrad, also insert the DC plug from the
comrad™ Power Supply to the DC Jack (VDC-IN) on the back of the comrad™. Plug the other end of the
power supply to a wall outlet.
If the comrad™ is connected to a PC for the first time, it will initiate MAXVIEW™ Installation. Subsequent connections will
automatically open MAXVIEW™. Refer to MAXVIEW™ section for details.