•
Remove the grid supporting the pan and clean it carefully, removing any deposits with a brush.
•
The burner must be cleaned with great care using soap and water or non-abrasive detergents.
Check that the flame holes of the burner aren't obstructed and if they are remove the deposits
carefully.
•
Don't leave foodstuffs (especially acid foodstuffs such as salt, vinegar, lemon ... ) on the stainless
steel parts because this will damage them.
•
Never wash the appliance with direct high-pressure water jets.
•
If the appliance isn't used for long periods of time, vigorously pass a cloth dampened with liquid
petrolatum over all of the steel parts in order to leave a protective film of oil; furthermore, air the
room where the appliance is installed periodically.
•
Don't use corrosive substances (muriatic acid for example) to clean the appliance supporting
surface.
Chapter IV Specifications, diagrams and parts list
Table 4. Technical data
Model
FG11
Overall dimensions
605 x 605 x 460 mm
Number of burners
1
Nominal heat input
10 kW
Minimum heat input
♦
1,6 kW
Gas fitting
ISO 7/1 R 1/2“
Category
II2H3+
Type of construction:
A
1
Nominal gas pressure
G20
20 mbar
G30/G31
28/37 mbar
Gas consumption at MAX rate
(calculated with the net heat
value H
i
at 15°and 1013 mbar)
G20
1,058 m
3
/h
G30
0,789 kg/h
Gas consumption at MIN rate
(calculated with the net heat
value H
i
at 15°and 1013 mbar)
G20
0,169 m
3
/h
G30
0,126 kg/h
Table 5. Parts list
Component
Manufacturer
Model/code
Main burner
FLAM GAS
08796551020
Thermocouple
SIT
08753500200
Gas tap
PEL PINTOSSI
20S
13
Summary of Contents for FG11
Page 29: ...Fig 4 Abb 4 Fig 5 Abb 5 Fig 6 Abb 6 Fig 7 Abb 7 29...
Page 30: ...Fig 8 Abb 8 Fig 9 Abb 9 Fig 10 Abb 10 30...
Page 31: ......
