EN
89
NOTE
The smart control calculates the baking time for each baking cycle separately.
Thus, the baking time may differ from the value given for the previous baking cycle
(see: ‘Properties of Your New Waffle Maker / Smart Control’).
2. Let the appliance operate until the signal sounds or until the desired baking time
is reached. Then take out your waffles (see: ‘Baking the Waffle Batter’).
3. If you wish to bake further portions, proceed with step 1.
4. After baking the batter, switch off (press the power button) and unplug the appli-
ance. Leave the appliance cool down sufficiently with the lid open. Clean the
appliance after each use (see: ‘Care and Cleaning’).
CONTROLLING THE BAKING CYCLE MANUALLY
IMPORTANT -
Please consider that the program “CUSTOM” does not give a
signal for the end of baking. You must monitor the baking cycle by yourself. The
baking time already passed is counted up on the LCD display in minutes and
seconds.
IMPORTANT -
If you wish to select another program or another browning level,
you need to switch off the appliance at least shortly by pressing the power but-
ton. When switching on the appliance thereafter, all former settings are selected.
However, you can change all settings now quite as usual.
NOTE
The texture function has no influence on the result, when using manual control.
However, the browning level may be adjusted and gives the similar results as with
any other program.
1. If you wish to control the baking cycle manually, press the menu button repea-
tedly, until the manual program “CUSTOM” is selected.
2. If required, adjust the browning (see: ‘Entering Your Settings’).
3. Via the measuring cup, fill the correct amount of batter into the waffle areas and
close the lid (see: ‘Baking the Waffle Batter’).
IMPORTANT -
After starting the manual control (program “CUSTOM”), the menu
button and browning control dial are inactive.
Summary of Contents for WAFFLE IRON ADVANCED CONTROL
Page 119: ......
