EN
85
NOTE
During the very first heating, the appliance may give off some light smoke or bur-
ned smell. This is normal and will subside with further use. Before baking waffles
for the very first time, heat the appliance without batter for approx. 20 minutes for
preparing the heating elements for operation (see: ‘Before First Use’).
PREPARATIONS
CAUTION
– Do not place the appliance on coated surfaces of delicate
furniture, even when the appliance is cold. Delicate surfaces could get damaged
by scratches or abrasion of the rubber feet of the appliance. For moving the appli-
ance, the lid may be locked to the base via the locking clip (vertical closed posi-
tion).
Do not attempt to open the lid with violence
(see: ‘Properties of Your New
Waffle Maker / Locking the Lid to the Base’).
WARNING
– Always completely unwind the power cord, before connecting
the appliance to the power supply. Do not operate the appliance with the power cord
wrapped around the cord storage to avoid damage and injuries due to overheating
and short circuit.
As soon as the appliance is switched on and the LCD display illu-
minates, the heating elements start heating the waffle plates at the base and lid.
After switching on, only touch the appliance at the operating elements.
1. Completely unwind the power cord of the appliance. Then place the appliance
on a suitable and heat-resistant surface (see: ‘General Safety Instructions’) near a
suitable wall power outlet (see: ‘Important Safeguards for Electrical Appliances’).
Turn the locking clip counter-clockwise to the horizontal open position for unlo-
cking the lid. Thereafter, you can open the lid without resistance. Ensure that the
waffle plates are clean and dry.
2. Close the lid. With the lid closed, the waffle plates reach the desired cooking
temperature quickly, and without useless energy loss.
3. Prepare your waffle batter. Some appropriate recipes are given in this booklet.
4. Connect the appliance to a sufficient power supply (see: ‘Technical Specifica-
tions’). Press the power button for switching on the appliance. The LCD display
illuminates, showing the defaults: program “BELGIAN”, medium browning (level
4), and texture function “CRISP EXTERIOR MOIST EXTERIOR”. The appliance
starts heating immediately.
5. Select the required settings (see below: ‘Entering Your Settings’).
Summary of Contents for WAFFLE IRON ADVANCED CONTROL
Page 119: ......
