44
CARE AND CLEANING
WARNING:
Always switch the appliance to standby mode (pressing the STOP
button), unplug, and leave the appliance cool down, before cleaning the appliance.
Always ensure that all parts of the appliance are
out of reach of young children. Risk
of Suffocation! Especially ensure that young children do not swallow the frothing
magnet.
Do not spill or pour any liquids on or in the power base or power cord. Do not place
or immerse the power base or power cord in any liquids to avoid damage, over-
heating, fire, and electric shock.
Do not use abrasive cleaning agents or aggressive liquids (e.g. bleach, solving
agents) for cleaning the appliance or any part of it, to avoid damage to the surfaces
and seal of the lid. Do not use any hard or sharp-edged objects for cleaning (e.g.
scoring pads, knives, scrapers). Do not use violence.
Especially, use care when clea-
ning the frothing magnet to avoid damage to the heating coil.
DO NOT place the power base or power cord in an automatic dishwasher!
IMPORTANT:
It is crucial to rinse the frothing rod immediately after each usage to
avoid the build-up of stubborn residues on the surfaces, because this would decrease
the performance of the appliance considerably and could cause unpleasant odours
and a stale taste.
1. Remove the lid and take out the frothing rod. Completely empty the milk jug and
rinse the milk jug, lid and frothing rod thoroughly with clear tap water.
2. Fill the milk jug up to the MIN marking with clear water and add a little drop of
dish-washing liquid. Wipe dry the exterior of the milk jug. Insert the frothing rod
and close the milk jug with the lid. Place the milk jug onto the power base.
3. Press the Chocolate button to run a complete heating cycle. Remove the milk jug
from the power base and remove lid and frothing rod.
NOTE:
If required, you may remove the silicone seal of the lid for cleaning.
4. Using a soft nylon brush, clean the milk jug and lid with warm dishwater. For this,
you may use the warm solution within the milk jug.
5. Rinse all parts thoroughly with clear tap water.
TIP:
With stubborn residues on the frothing rod, clean the frothing rod as described
in the following section ‘Removing Stubborn Residues from the Frothing Rod’.
NOTE:
You may clean the milk jug, lid and frothing rod in an automatic dishwasher.
For this, place the lid and frothing rod on the upper rack.
CAUTION:
Do not disassemble the frothing rod before cleaning in the automatic
dishwasher, to avoid that small parts get damaged or lost during the cleaning pro-
cess.
