36
PROPERTIES OF YOUR MILK FROTHER
Your new »Design Milk & Chocolate Advanced« is intended for heating and texturing
milk, and for preparing hot chocolate and other delicious drinks. After reaching the
pre-programmed optimum temperature and/or time, the appliance will shut off the
frothing/stirring process automatically with an acoustic signal.
FUNCTIONS
The appliance can operate 4 preprogrammed functions.
Function Button
Symbol
Duration
Maximum Amount
Temperature
Cold Froth hold frothing
button pressed for
2 seconds;
button is illumina-
ted in blue
approx. 120
seconds (2
minutes)
300 ml
generates 1 part of milk
and 2 parts of froth
no heating
Hot Froth press frothing
button shortly;
button is illumina-
ted in red
up to 210
seconds
(3 1/2
minutes)
300 ml
generates 1 part of milk
and 2 parts of froth
approx. 67°C
Hot Milk
Hot Milk button
up to 360
seconds
(6 minutes)
600 ml
generates approx. 1/5
froth
approx. 67°C
Hot
Chocolate
Chocolate button
up to 415
seconds
(almost 7
minutes)
300 ml
(without chocolate basket)
600 ml
(with chocolate basket)
plus 2-4 pieces of a 100g
bar of chocolate
approx. 77°C
With a function already running, all other function buttons are inactive. However, you
may cancel any running function at any time by pressing the STOP button, bringing
the appliance back to standby mode. Thereafter, you can select another function.
SELF-RESETTING PROTECTION DEVICE
The »Design Milk & Chocolate Advanced« is fitted with a self-resetting protection
device, which safeguards against overheating of the heating coil at the brim of the
frothing magnet and the induction system in the power base. If the risk of overheating
occurs, the appliance will automatically switch off the induction system and stirring
motor within the power base (within 20 seconds). In this case, the STOP button will
flash with an acoustic signal. Press the STOP button to switch back to standby mode.
