46
Additionally, with the blender jug overfilled, you may get an uneven and poor mixing
result.
IMPORTANT:
The blender jug is no measuring device. If your recipe requires exact
amounts, please use a separate measuring cup.
1. Remove the blender jug from the motor base. Prepare your food and fill the ingre-
dients into the blender jug.
2. Close the blender jug with the lid and press the lid down. Insert the measuring
cup. There are two protrusions on the exterior of the measuring cup. Place the
measuring cup into the lid with these protrusions sliding into the grooves in the
lid. Lock the measuring cup by turning it clockwise.
3. Ensure that the blender is switched OFF (turn the ON/OFF switch to ›0‹). Ensure
that the bottom of the blender jug is clean and dry.
4. Place the blender jug on the motor base. If required, turn the blender jug a little
until it settles down on the motor base and stands firmly. The appliance is now
ready for operation.
WARNING:
Do not remove the lid and/or grasp into the blender jug or holding
any type of objects into the blender jug with the motor agitating and/or the blender
jug placed on the motor base.
Do not remove the blender jug, while the motor is agi-
tating. Always switch OFF the appliance (turn the ON/OFF switch to ›0‹) and wait
until the blades stop complete. Thereafter remove the blender jug from the motor base
before grasping into the blender jug or holding any objects into the blender jug.
5. Via the ON/OFF switch, select the desired speed setting: ›1‹ (slowly),
›2‹ (quickly) or ›P‹ (pulse). The motor starts running immediately.
CAUTION:
If the motor slows down during operation or gets stuck, immediate-
ly switch OFF the appliance (turn ON/OFF switch to ›0‹). Please, adhere to the
instructions in chapter ‘Solving Problems’.
The appliance will process your food within seconds. Do not leave the appliance
operate continuously for more than 1 minute. Make a break of at least 1 minute after
1 minute of continuous operation.
Note:
The motor will start only with the blender jug placed on the motor base correctly.
When using the pulse function ›P‹, the ON/OFF switch will turn back to ›0‹, as
soon as you release the ON/OFF switch.
6. After a few seconds of operation, switch back to ›0‹ to switch OFF the appli-
ance.
Summary of Contents for 40897
Page 59: ...59...
