54
1. Remove the lid and measuring cup from the blender jug. Place the blender jug
upside down on a stable surface. While holding the glass body with one hand
turn the threaded sleeve counter-clockwise to remove the threaded sleeve.
2. Holding the blade assembly by the rim, pull the blade assembly carefully out of
the glass body. Remove the silicone seal.
3. Stubborn residues can be removed easily, after soaking the parts in warm dish-
water for approx. 10 minutes.
4. After soaking, brush the blade assembly and threaded sleeve with a soft nylon
brush. Doing so, do not touch the blades with your fingers but hold the blade
assembly by the rim to avoid injuries. Ensure not to scratch on the sealing surfaces
of the blade assembly.
5. Clean the glass body and silicone seal using a soft cloth or sponge. Ensure not
to damage the silicone seal.
IMPORTANT:
Replace the parts, if you cannot get them completely clean this way.
6. Rinse all parts with clear water.
7. After cleaning, dry all parts thoroughly and leave them dry naturally for approx.
1/2 hour, where they are
out of reach of young children
.
8. Reassemble the blender jug after cleaning (see: ‘Assembling the Blender Jug’).
This way, no one can touch the blades unintentionally.
Summary of Contents for 40897
Page 59: ...59...
