2
1. Introduction
Be sure to read the manual before using the product.
Thank you for purchasing our Automatic Air Sampling Pump GSP-501FT.
Please read and understand the manual completely before using this sampling pump.
Also, after reading, keep the manual in a place where it can be referred to at any time.
About this manual
Do not use this product until you understand the manual completely.
When lending or giving this product to a third party, be sure to hand over the manual with this
product.
If the manual is lost or damaged, contact Gastec or your Gastec representative promptly.
This manual contains "2. For Safe Operations" to ensure safe operation. Be sure to read this
section before using this product.
Copyright Notice
The copyright of this document is owned by Gastec Corporation. Therefore, unauthorized
reproduction or duplication in whole or in part is strictly prohibited.
2. For Safe Operations
To use this product properly, be sure to observe the following precautions. The precautions are
critical for safety.
This product should be used by specialists with knowledge of environmental measurements.
This product is an automatic air sampling pump. Do not use the product for purposes other than
air sampling of various Gastec gas detector tubes, sorbent tubes, etc.
Gastec Corporation shall not take responsibility for any accidents that occur in
situations that are contrary to the above items.
The precautions in this manual are classified by the following indications according to the
magnitude of the danger or damage and the degree of the imminence.
The shape, size, and position of the figures and illustrations may be different from the actual
product.
Symbol marks with the following definitions are used to ensure proper and safe use of the
product.
Warning
This means that death or serious bodily injuries may result if not observed.
Caution
This means that minor or moderate bodily injuries may result if not observed.
Note
This means operational tips for proper use of the product to prevent functional
failures.
