GARO ENTITY PRO, Installation And Operation Manual

Page: 71 / 102

NOTE
To access a location for installation, the owner of the
location creates/generates a 12 letter installation code
that works like a key to the location. The code can be
handed over to an installer by email, paper or any other
media. The installer must have the code to start an
installation. If a new installation code is generated by
the owner, the old code becomes invalid and cannot be
used. A location is normally equal to an electrical mains
system of a building/site/area. The installation code is
only required one time per location.
7.
New installation for new location: Create a new
installation for a new location. During the
installation, which starts with the creation of the
location, the installer acts as a temporary owner.
After the installation, the location is transferred to
the actual owner.
To install a unit (installer)
1. Select the location to install the unit(s) in.
2. Click Add new unit.
Version: 1.3 71
Installation