GARO ENTITY PRO, Installation And Operation Manual

Page: 20 / 102

4.4 TO DO A PLAN FOR THE INSTALLATION
•
Prepare the installation location according to the
steps that are shown in the illustration.
A. Decide where to put the charging station(s).
Make sure that the location is suitable due to
weather conditions and preparation for future
expansion.
NOTE
Charging station(s) can be attached to a wall, a stand
or a pole. Installation accessories are available at
GARO.
B. Decide on how to define the location and
naming of the charging station(s).
C. Decide on access control for EV drivers. It is
possible to control access with the GARO
Connect app or RFID tags where controlled
authorization is necessary. Those can also be
combined in a schedule.
NOTE
RFID tags are available as accessories at GARO.
D. Plan the power supply and current availability
on all levels of the installation. Plan for the DLM
(dynamic load management) system setup. Refer
to 4.13.1 Dynamic Load Management (DLM)
functionality, page 43 .
E. If several charging stations are used, decide
which unit (charging station or load interface)
that should act as master unit. This can be
affected by a DLM setup.
F. Decide the internet connection type for the
master unit in the connection group (the
charging station or a load interface unit(s)
managing this role).
G. Decide the connection type between all
charging stations, if applicable. If large
connection groups are needed for DLM the
connection structure needs to be divided into a
group structure, with max. 32 units in each
group preferably following the DLM structure,
and when a mesh Wifi grid is required to be set
up.
H. Make sure that the necessary tools and testing
instruments for installation are available.
I. Make sure that the correct installation material is
available.
J. Decide if the installer or owner should prepare
the installation in the GARO Connect app. Refer
to 4.14 GARO Connect, page 56 .
J I K
F E G
B A C
H
D
L
N M
WWW
20 Version: 1.3
Installation